- Home /
- MD40 Magnetic Drill 40mm Core Drill Precise Cuts Magnetic Drilling Unit
MD40 Magnetic Drill 40mm Core Drill Precise Cuts Magnetic Drilling Unit
Product Description:
Brief Introductions about the product:
If you use the Steel MD40 Magnetic Drill Press, it accept up to 2-inch, high-speed steel annular cutters with a maximum boring diameter of 1-1/2 in. (40 mm). The tool will attach directly to the metal drilling surface with a powerful electromagnet which has 2,700 lbs. of max force and ensures the machine will not move during the drilling process. A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down. A full line of 1-inch and 2-inch HSS annular cutters are available. The operation is easy referring to the instructions.
Usage:
Magnetic drill maintenance:
Which can be seen in the development of magnetic drill is precision required. we ordinary operators to understand his basic principles, But in this aspect of the magnetic drill repair the better is professional disassembly assembly or maintenance.On the one hand magnetic drill internal power generated high Voltage, non-professionals may get into life-threatening, the other aspect, th magnetic drilling precision is possible to be affected by non-professional assembly.
CAUTION: Make sure to turn off the switch and unplug the power cor, before checking and maintaining.
1, Magnetic drill should be stored in a dry, clean, no corrosive gases and where children can not touch.
2, Save every part in the demolition of magnetic drill and when assembly it is good to put in the original parts.
3, Magnetic drill parts should be often injected into the lubricating oil and keep clean.
4, Magnetic drill maintenance should always be checked regularly, must check the power lines, plugs etc.
Product Featuers:
-
Suitable for drilling on any metal surface
-
Rack and pinion gear system for exact drilling depth
-
Two years warranty against manufacturer defect
Technical Data:
-
Power: 1100 watts
-
Power supply: 220V 50 Hz
-
Idle speed approx .: 580 rpm
-
Max. Drilling Ø (with core drill): 1-1/2 in(40 mm)
-
Max. Drilling depth Ø (core drill): 50 mm
-
Max. Drilling Ø (with full drill): 1.5-13 mm
-
Max. Travel distance: 5 in(125mm)
-
Magnetic holding force: 12000 N
-
Tool Holder: 3/4 in(19.05 mm) Weldon Shank
-
Magnetic foot dimensions ca: 160 x 80 mm
-
Weight ca: net 14kg, total weight approx .: 19 Kg
-
Warranty: 2 years
Packing List:
-
1 x SDT MD40 Electric Magnetic Drill Press
-
1 x User's Manual
Detailed Images:
